BSP_FULL eventually causes Majestic crash on SigmaStar ssc337 #1925
Description
Hi there,
I really appreciate the OpenIPC project — it is actively maintained and provides a reliable platform for IP camera solutions!
However, we have encountered a memory-related issue that leads to instability over longer uptimes.
System Information
Board: ssc337 with imx307 sensor
Affected version: 2.5.12.29-lite
Description
During startup, the kernel logs show repeated BSP_FULL messages.
Initially, the system continues running, but after 1–2 days of uptime, Majestic and other modules start disconnecting, accompanied by multiple kernel errors related to buffer handling.
Full kernel log
Booting Linux on physical CPU 0x0
Linux version 4.9.84 (runner@runnervmh13bl) (buildroot-gcc-13.3.0) #2 PREEMPT Mon Dec 29 22:50:34 UTC 2025
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
early_atags_to_fdt() success
OF: fdt:Machine model: INFINITY6B0 SSC009A-S01A QFN88
cma: early_cma(2M)
LXmem is 0x3fe0000 PHYS_OFFSET is 0x20000000
Add mem start 0x20000000 size 0x3fe0000!!!!
LX_MEM = 0x20000000, 0x3fe0000
LX_MEM2 = 0x0, 0x0
LX_MEM3 = 0x0, 0x0
EMAC_LEN= 0x0
DRAM_LEN= 0x0
deal_with_reserve_mma_heap memblock_reserve success mma_config[0].reserved_start=
0x21fe0000
cma: dma_contiguous_reserve(limit ffffffff)
cma: dma_contiguous_reserve: reserving 2 MiB for global area
cma: cma_declare_contiguous(size 0x00200000, base 0x00000000, limit 0xffffffff alignment 0x00000000)
cma: Reserved 2 MiB at 0x21c00000
Memory policy: Data cache writeback
On node 0 totalpages: 16352
free_area_init_node: node 0, pgdat c0402274, node_mem_map c1f56000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16352 pages, LIFO batch:3
CPU: All CPU(s) started in SVC mode.
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16224
Kernel command line: console=ttyS0,115200 panic=20 root=/dev/mtdblock3 init=/init mtdparts=NOR_FLASH:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data) LX_MEM=0x3FE0000 mma_heap=mma_heap_name0,miu=0,sz=0x2000000 cma=2M
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 25584K/65408K available (2385K kernel code, 227K rwdata, 1196K rodata, 128K init, 145K bss, 37776K reserved, 2048K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc4000000 - 0xff800000 ( 952 MB)
lowmem : 0xc0000000 - 0xc3fe0000 ( 63 MB)
modules : 0xbf800000 - 0xc0000000 ( 8 MB)
.text : 0xc0008000 - 0xc025c7f0 (2386 kB)
.init : 0xc03aa000 - 0xc03ca000 ( 128 kB)
.data : 0xc03ca000 - 0xc0402e78 ( 228 kB)
.bss : 0xc0404000 - 0xc0428438 ( 146 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:16 nr_irqs:16 16
ms_init_main_intc: np->name=ms_main_intc, parent=gic
ms_init_pm_intc: np->name=ms_pm_intc, parent=ms_main_intc
ss_init_gpi_intc: np->name=ms_gpi_intc, parent=ms_main_intc
Find CLK_cpupll_clk, hook ms_cpuclk_ops
arm_arch_timer: Architected cp15 timer(s) running at 6.00MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 440795202238 ns
sched_clock: 56 bits at 6MHz, resolution 166ns, wraps every 4398046511055ns
Switching to timer-based delay loop, resolution 166ns
console [ttyS0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 12.00 BogoMIPS (lpj=60000)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x200081c0 - 0x200081f0
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 16 (order: -4, 448 bytes)
NET: Registered protocol family 16
cma: cma_alloc(cma c0414790, count 64, align 4)
cma: cma_alloc(): returned c1f8e000
DMA: preallocated 256 KiB pool for atomic coherent allocations
Version : MVX4##I6B0g#######KL_LX409##[BR:g]#XVM
GPIO: probe end
[ss_gpi_intc_domain_alloc] hw:42 -> v:49
[MS_PM_INTC] hw:20 -> v:52
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e800
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e820
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 2, 20480 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 128 (order: 0, 6144 bytes)
UDP-Lite hash table entries: 128 (order: 0, 6144 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
workingset: timestamp_bits=30 max_order=13 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci monitor start running
Mstar_ehc_init version:20180309
Sstar-ehci-1 H.W init
Get power-enable-pad from DTS GPIO(65535)
Titania3_series_start_ehc start
[USB] config miu select [70] [e8] [ef] [ef]
[USB] enable miu lower bound address subtraction
[USB] init squelch level 0x2
[USB] no platform_data, device tree coming
[USB][EHC] dma coherent_mask 0xffffffffffffffff mask 0xffffffffffffffff
BC disable
[USB] soc:Sstar-ehci-1 irq --> 43
Sstar-ehci-1 soc:Sstar-ehci-1: EHCI Host Controller
Sstar-ehci-1 soc:Sstar-ehci-1: new USB bus registered, assigned bus number 1
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e840
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e860
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e880
Sstar-ehci-1 soc:Sstar-ehci-1: irq 43, io mem 0xfd284800
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.84 ehci_hcd
usb usb1: SerialNumber: mstar
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
1f221000.uart0: ttyS0 at MMIO 0x0 (irq = 37, base_baud = 10800000) is a unknown
1f221200.uart1: ttyS1 at MMIO 0x0 (irq = 38, base_baud = 10800000) is a unknown
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e8a0
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e8c0
1f220400.uart2: ttyS2 at MMIO 0x0 (irq = 40, base_baud = 10800000) is a unknown
>> [sdmmc] ms_sdmmc_probe
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e8e0
[Padmux]reset PAD60(reg 0xe00:28; mask0x4000) t0 GPIO (org: PM_SD_CDZ_MODE)
[Padmux]reset PAD54(reg 0x101e00:8; mask0xc) t0 GPIO (org: SD_MODE)
>> [sdmmc_0] Probe Platform Devices
MSYS: DMEM request: [emac0_buff]:0x00000812
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e900
MSYS: DMEM request: [emac0_buff]:0x00000812 success, CPU phy:@0x21C48000, virt:@0xC1C48000
libphy: mdio: probed
mdio_bus mdio-bus@emac0: /soc/emac0/mdio-bus/ethernet-phy@0 has invalid PHY address
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 0
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 1
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 2
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 3
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 4
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 5
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 6
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 7
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 8
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 9
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 10
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 11
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 12
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 13
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 14
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 15
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 16
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 17
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 18
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 19
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 20
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 21
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 22
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 23
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 24
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 25
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 26
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 27
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 28
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 29
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 30
mdio_bus mdio-bus@emac0: scan phy ethernet-phy at address 31
[emac_phy_connect][3328] connected mac emac0 to PHY at mdio-bus@emac0:00 [uid=11112222, driver=SStar 10/100 Ethernet Phy]
ms_rtc 1f002400.rtc: rtc core: registered 1f002400.rtc as rtc0
[ms_rtc_probe]: rtc setup, frequency=12000000
[gpioi2c] sda-gpio=8, scl-gpio=9
MSYS: DMEM request: [BDMA_FSP_WBUFF]:0x00010040
cma: cma_alloc(cma c0414790, count 17, align 4)
cma: cma_alloc(): returned c1f8ea00
MSYS: DMEM request: [BDMA_FSP_WBUFF]:0x00010040 success, CPU phy:@0x21C50000, virt:@0xC1C50000
[Ser flash] phys=0x21c50000, virt=0xc1c50000, bus=0x01c50000 len:0x10040
[FSP] Flash is detected (0x0B03, 0xC8, 0x40, 0x17) ver1.1
[FSP] 1-1-1 FAST_READ MODE
mtd .name = NOR_FLASH, .size = 0x00800000 (8MiB)
.erasesize = 0x00010000 .numeraseregions = 0
MXP_PARTS!!
MXP found at mxp_offset[2]=0x0000F000, size=0x1000
5 cmdlinepart partitions found on MTD device NOR_FLASH
Creating 5 MTD partitions on "NOR_FLASH":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000050000 : "env"
0x000000050000-0x000000250000 : "kernel"
0x000000250000-0x000000750000 : "rootfs"
0x000000750000-0x000000800000 : "rootfs_data"
MSYS: DMEM request: [AESDMA_ENG]:0x00001000
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e920
MSYS: DMEM request: [AESDMA_ENG]:0x00001000 success, CPU phy:@0x21C49000, virt:@0xC1C49000
MSYS: DMEM request: [AESDMA_ENG1]:0x00001000
cma: cma_alloc(cma c0414790, count 1, align 0)
cma: cma_alloc(): returned c1f8e940
MSYS: DMEM request: [AESDMA_ENG1]:0x00001000 success, CPU phy:@0x21C4A000, virt:@0xC1C4A000
[ms_cpufreq_init] Current clk=799999872
[NOTICE]Each grp bit0 must be enabled!
[NOTICE]pwm-isr(53) success. If not i6e or i6b0, pls confirm it on .dtsi
NET: Registered protocol family 17
ThumbEE CPU extension supported.
ms_rtc 1f002400.rtc: setting system clock to 2025-12-30 12:05:55 UTC (1767096355)
OF: fdt:not creating '/sys/firmware/fdt': CRC check failed
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
devtmpfs: mounted
This architecture does not have kernel memory protection.
random: crng init done
exfat: loading out-of-tree module taints kernel.
[emac_phy_link_adjust] EMAC Link Up
mhal: module license 'PROPRIETARY' taints kernel.
Disabling lock debugging due to kernel taint
mhal driver init
[CSI] probe
Request CSI IRQ[0]#32
CSI interrupt registered
vif driver probe
Create device file. vif_ints,0
venc_probe:890 venc driver is probed.
jpe driver probed
�[1;31m[DRV_SCL_MODULE] [_DrvSclVpeModuleInit @ 142]
�[m
[Isp_Driver_Init]
[s32CurClkIdx] = 5
[ISP] Request IRQ: 31, 57
[IspMid_Driver_Init]
ispsclttl:0
~~~~~~~~~~~ Mload Inside init module ~~~~~~~~~~~~~~~
DivpProcInit 526
module [sys] init
MI_SYSCFG_SetupMmapLoader default_config_path:/config/config_tool, argv1:/config/load_mmap,argv2:/config/mmap.ini
�[35mFunction = init_glob_miu_kranges, Line = 728, Insert KProtect for LX @ MIU: 0�[m
�[35mFunction = init_glob_miu_kranges, Line = 737, [INIT] for LX0 kprotect: from 0x20000000 to 0x23FE0000, using block 0�[m
config...... cmdpath:/config/config_tool, argv0:load_config
config...... cmdpath:/config/config_tool, argv1:/misc/config.ini
config...... cmdpath:/config/config_tool, argv2:/misc/PQConfig.ini
config...... cmdpath:/config/config_tool, argv3:(null)
function:parese_Cmdline,pCmd_Section:0x3FE0000
Get LX_MEM fail in mmap ....
m
m
a
_
h
e
a
p
_
n
a
m
e
0
miu=0,sz=2000000 reserved_start=21fe0000
r_front->miuBlockIndex:0,r_front->start_cpu_bus_pa:0x20000000,r_front->start_cpu_bus_pa+r_front->length:0x21fe0000
mi_sys_mma_allocator_create success, heap_base_addr=21fe0000 length=2000000
Kernel CONFIG_HZ = 100
Sigmastar Module mi_sys version: project_commit.a8e28a0 sdk_commit.d0df0a8 build_time.20201022150013
module [rgn] init
module [ai] init
module [ao] init
module [sensor] init
module [shadow] init
module [divp] init
module [vif] init
module [vpe] init
module [venc] init Oct 22 2020 15:00:51
[ispmid_fwrite] CMD : isproot
[ISP] Change isp root to /etc/firmware
Connect IMX307_HDR_init_driver linear to sensor pad 0
CamOsMutexInit already inited, LR:0xBF82E8A3
Connect IMX307_HDR_init_driver SEF to vif sensor pad 0
CamOsMutexInit already inited, LR:0xBF82E8A3
Connect IMX307_HDR_init_driver LEF to sensor pad 0
client [643] connected, module:sys
client [643] connected, module:sensor
client [643] connected, module:vif
client [643] connected, module:vpe
chipidx 4
[SCLUTILITY]HalUtilityInit(1141)::Allocate Success!
�[1;31m[DRV_SCL_MODULE] [DrvSclModuleClkInit @ 316] Use Default Clk [240000000]
�[m
CmdqProcInit 821
[CMDQ0] Virtual IRQ: 30
CmdQ Free ID = 0, IspLocalCmdQHnd = 0xbf91f560
ISP_IRQ_WQ_FRAME_DONE add WQ error! fpCB=0x0, pData=0x0
CamOsMutexInit already inited, LR:0xBF83F83D
CameraIsp_EnableChannel3A, ch:0 data: (null)
CameraIsp_EnableCus3A AE=1, AWB=0, AF=0
CameraIsp_EnableChannel3A, ch:0 data: (null)
CameraIsp_EnableCus3A AE=1, AWB=1, AF=0
client [643] connected, module:venc
Create mi dev0
Create mi dev0
�[1;33m[MI WRN ]: _MI_VENC_CreateMiDevice[7816]: mi device:0 has been inited
�[0m
Create mi dev1
Create mhal DEV0.
[ven-w][wrap] illegal width and height. will use default value (2688 1952)
[ven-m][wrap] venc_dev_preset:1390 GetMMaHeapName s32Ret=0xa009201f, u8MMAHeapName=.
[ven-m][wrap] fw path /etc/firmware/chagall.bin
[CMDQ1] Virtual IRQ: 30
Create mhal DEV1.
[ven-w][wrap] venc MMA callback function duplicate registration Force OverWrite!!
[ven-w][wrap] venc dev created, not support set E_MHAL_VENC_MAX_ENCODE_RESOLUTION, pls set before createdev
Create mhal DEV2.
===== [MhalCameraOpen] begin ===== VifMask : 3
Ch= 0, SNR ID: 0x0, VifCh = 0x0, PreOpen = 0
3DNR = 2, Rotation = 0, AckTie : 0
(W, H): (1920, 1080)
PixelFmt: 2, BayerID: 0, YuvOrder: 0
Mode: 0, HdrType: 0
[CameraReadIqData] isp root is /etc/firmware, nCh = 0
client [643] connected, module:rgn
[Padmux]reset PAD61(reg 0xe00:1c; mask0x10) t0 GPIO (org: PM_IRIN_MODE)
Chn0 auto change fps from (25/1) to (11/1)
Chn0 auto change fps from (11/1) to (26/1)
Chn0 auto change fps from (26/1) to (30/1)
[ven-w][wrap] BSP_FULL 02713a60, 02725000, 115a0
[ven-w][wrap] BSP_FULL 02714200, 02725000, 10e00
[ven-w][wrap] BSP_FULL 02714080, 02725000, 10f80
[ven-w][wrap] BSP_FULL 02713fa0, 02725000, 11060
[ven-w][wrap] BSP_FULL 02714020, 02725000, 10fe0
[ven-w][wrap] BSP_FULL 02714360, 02725000, 10ca0
[ven-w][wrap] BSP_FULL 02714420, 02725000, 10be0
[ven-w][wrap] BSP_FULL 027142c0, 02725000, 10d40
[ven-w][wrap] inst[1] picStreamBufferSize:0x10d60 != BufFullSzie:0x10d5a
[ven-w][wrap] BSP_FULL 027142a0, 02724ffa, 10d5a
[ven-w][wrap] BSP_FULL 027147e0, 02725000, 10820
[ven-w][wrap] BSP_FULL 027144c0, 02725000, 10b40
[ven-w][wrap] BSP_FULL 02714420, 02725000, 10be0
[ven-w][wrap] BSP_FULL 02714600, 02725000, 10a00
...
Dec 29 12:53:12 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710020, 02725000, 14fe0
Dec 29 12:53:14 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710460, 02725000, 14ba0
Dec 29 12:53:16 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710f20, 02725000, 140e0
Dec 29 12:53:18 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710720, 02725000, 148e0
Dec 29 12:53:20 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710d60, 02725000, 142a0
Dec 29 12:53:22 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710d40, 02725000, 142c0
Dec 29 12:53:24 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710260, 02725000, 14da0
Dec 29 12:53:26 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710300, 02725000, 14d00
Dec 29 12:53:28 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710460, 02725000, 14ba0
Dec 29 12:53:30 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027102a0, 02725000, 14d60
Dec 29 12:53:32 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710220, 02725000, 14de0
Dec 29 12:53:34 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710c00, 02725000, 14400
Dec 29 12:53:36 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710d60, 02725000, 142a0
Dec 29 12:53:38 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027105a0, 02725000, 14a60
Dec 29 12:53:40 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027101c0, 02725000, 14e40
Dec 29 12:53:42 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027117c0, 02725000, 13840
Dec 29 12:53:44 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710d40, 02725000, 142c0
Dec 29 12:53:46 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711080, 02725000, 13f80
Dec 29 12:53:48 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02710dc0, 02725000, 14240
Dec 29 12:53:50 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711340, 02725000, 13cc0
Dec 29 12:53:52 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711720, 02725000, 138e0
Dec 29 12:53:54 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711500, 02725000, 13b00
Dec 29 12:53:56 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027109c0, 02725000, 14640
Dec 29 12:53:58 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711b20, 02725000, 134e0
Dec 29 12:54:00 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027106e0, 02725000, 14920
Dec 29 12:54:02 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027124c0, 02725000, 12b40
Dec 29 12:54:04 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711e20, 02725000, 131e0
Dec 29 12:54:06 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711000, 02725000, 14000
Dec 29 12:54:08 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711e40, 02725000, 131c0
Dec 29 12:54:10 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711320, 02725000, 13ce0
Dec 29 12:54:12 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711200, 02725000, 13e00
Dec 29 12:54:14 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02711060, 02725000, 13fa0
Dec 29 12:54:16 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027117e0, 02725000, 13820
Dec 29 12:54:18 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027111a0, 02725000, 13e60
Dec 29 12:54:20 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027115c0, 02725000, 13a40
Dec 29 12:54:22 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02712340, 02725000, 12cc0
Dec 29 12:54:24 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027121e0, 02725000, 12e20
...
Dec 30 07:24:09 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027140e0, 02725000, 10f20
Dec 30 07:24:14 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02714040, 02725000, 10fc0
Dec 30 07:24:20 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02714140, 02725000, 10ec0
Dec 30 07:24:22 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02714140, 02725000, 10ec0
Dec 30 07:24:29 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 027142a0, 02725000, 10d60
Dec 30 07:24:46 openipc-ssc337 kern.debug kernel: [ven-w][wrap] BSP_FULL 02713be0, 02725000, 11420
Dec 30 07:24:46 openipc-ssc337 kern.notice kernel: client [644] disconnected, module:rgn
Dec 30 07:24:46 openipc-ssc337 kern.err kernel: ^[[1;31mApps need check buffer clear flow. Driver clear window handler buffer c156ba00.
Dec 30 07:24:46 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:46 openipc-ssc337 kern.err kernel: ^[[1;31mApps need check buffer clear flow. Driver clear window handler buffer c156ba80.
Dec 30 07:24:46 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[1;31mApps need check buffer clear flow. Driver clear region handler 0.
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ISP P0 FIFO FULL(934)(0)
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[5;36mRegion Buffer Clear ready!!!!
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:47 openipc-ssc337 kern.notice kernel: client [644] disconnected, module:venc
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: _MI_VENC_StopMiDevice[8218]: CH0 is still running!
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: _MI_VENC_StopMiDevice[8228]: CH0 is still created!
Dec 30 07:24:47 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: _MI_VENC_StopMiDevice[8218]: CH1 is still running!
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: MI_VENC_IMPL_StopRecvPic[9572]: buffer locked, refCnt:1
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: _MI_VENC_StopMiDevice[8228]: CH1 is still created!
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: _MI_VENC_StopMiDevice[8218]: CH2 is still running!
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: _MI_VENC_StopMiDevice[8228]: CH2 is still created!
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:48 openipc-ssc337 kern.notice kernel: client [644] disconnected, module:vpe
Dec 30 07:24:48 openipc-ssc337 kern.warn kernel: ^[[1;31m[HALSCL]_HalSclDestoryRealTimeModeOrLastChannel Destroy process fence 3f
Dec 30 07:24:48 openipc-ssc337 kern.warn kernel: ^[[m
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ===== MhalCameraClose begin, ch = 0, VifMask: 0x3 =====
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: ===== MhalCameraClose, 11058 end. =====
Dec 30 07:24:48 openipc-ssc337 kern.err kernel: [CMDQ]Release CMDQ(0) service
Dec 30 07:24:49 openipc-ssc337 kern.err kernel: CmdqProcDeInit 875
Dec 30 07:24:49 openipc-ssc337 kern.err kernel: ReleaseAllBuffer count =0
Dec 30 07:24:49 openipc-ssc337 kern.err kernel: [CMDQ]Release CMDQ(1) service
Dec 30 07:24:49 openipc-ssc337 kern.notice kernel: client [644] disconnected, module:vif
Dec 30 07:24:49 openipc-ssc337 kern.notice kernel: client [644] disconnected, module:sensor
Dec 30 07:24:49 openipc-ssc337 kern.err kernel: ^[[1;33m[MI WRN ]: MI_SNR_IMPL_DeInit[925]: snr padid 0, force disable
Dec 30 07:24:49 openipc-ssc337 kern.err kernel: ^[[0m
Dec 30 07:24:49 openipc-ssc337 kern.notice kernel: client [644] disconnected, module:sys