SnapperGPS
What are the minimum dimensions of the trackers? #28
-
|
What are the minimum dimensions of the trackers? What would these dimensions look like with a waterproof casing? |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Currently, the smallest circuit board is this one with 26.3 mm x 28.5 mm. But you likely need some waterproofing around, e.g., heat shrinking tubing, potting, or a CNC-milled enclosure like these. If dimensions are a concern for you, you probably want to look into heat-shrink tubing or vacuum sealing. Both techniques just add a few millimetres maximum. Otherwise, the smallest CNC-milled enclosure currently on GitHub measures 49.25 mm x 72.17 mm x 15 mm. |
Beta Was this translation helpful? Give feedback.
Currently, the smallest circuit board is this one with 26.3 mm x 28.5 mm.
But you likely need some waterproofing around, e.g., heat shrinking tubing, potting, or a CNC-milled enclosure like these.
If dimensions are a concern for you, you probably want to look into heat-shrink tubing or vacuum sealing. Both techniques just add a few millimetres maximum. Otherwise, the smallest CNC-milled enclosure currently on GitHub measures 49.25 mm x 72.17 mm x 15 mm.