Second Movement - Jolt Fork

Watch Faces

Main Faces

• clock_face
• step_counter_face
• fast_stopwatch_face
• countdown_face
• advanced_alarm_face
• tally_face
• sunrise_sunset_face
• moon_phase_face,

Start of Secondary Faces

Done by holding the MODE button for 0.5 seconds on the clock

• settings_face
  • Able to turn off the display and chiming, along with set the clock to go into that mode after 5 hours of the watch reading less than 27C (tested to be a good threshold for when the watch is likely not being worn).
• set_time_face
• temperature_logging_face
• voltage_face
• accelerometer_status_face

Game Faces

Done by pressing START button holding the ALARM button for 1.5 seconds on the clock face

• black_jack_face
• endless_runner_face
• wordle_face
• higher_lower_game_face
• lander_face
• simon_face
• tarot_face

Other Changes

• Uses COUNTER32 logic.
• When the watch wakes to chime, we don't display the seconds on the clock.
• Chime sound is the beginning of Song of the Storm from Zelda: Ocarina of Time.
• No ticking animation and all faces show SLEEP indicator when in sleep mode.
• Added debouncing.
• Made DST logic need far fewer caching.
• B and I look like 8 and 1 on the bottom of the face when not in seconds.
• Added a seriff to 7.
• Improved off-axis viewing on custom LCD.

===============

This is the successor refactor of the Movement firmware for Sensor Watch.

Getting dependencies

You will need to install the GNU Arm Embedded Toolchain to build projects for the watch. If you're using Debian or Ubuntu, it should be sufficient to apt install gcc-arm-none-eabi.

You will need to fetch the git submodules for this repository too, with git submodule update --init --recursive

Building Your Own Movement

You can build the default watch firmware with:

make BOARD=board_type DISPLAY=display_type

where board_type is any of:

• sensorwatch_pro
• sensorwatch_green
• sensorwatch_red (also known as Sensor Watch Lite)
• sensorwatch_blue
• sensorwatch_jolt

and display_type is any of:

• classic
• custom
• jolt

If you're using this fork to build for the Jolt PCB (used for the G-Shock), running make on its own without selecting a board or diplsay type will work.

Optionally you can set the watch time when building the firmware using TIMESET=minute.

TIMESET can be defined as:

• year = Sets the year to the PC's
• day = Sets the default time down to the day (year, month, day)
• minute = Sets the default time down to the minute (year, month, day, hour, minute)

If you'd like to modify which faces are built and included in the firmware, edit movement_config.h. You will get a compilation error if you enable more faces than the watch can store.

Installing firmware to the watch

To install the firmware onto your Sensor Watch board, plug the watch into your USB port and double tap the tiny Reset button on the back of the board. You should see the LED light up red and begin pulsing. (If it does not, make sure you didn’t plug the board in upside down). Once you see the WATCHBOOT drive appear on your desktop, type make install. This will convert your compiled program to a UF2 file, and copy it over to the watch.

If you want to do this step manually, copy /build/firmware.uf2 to your watch.

Emulating the firmware

You may want to test out changes in the emulator first. To do this, you'll need to install emscripten, then run:

emmake make BOARD=sensorwatch_red DISPLAY=classic
python3 -m http.server -d build-sim

Finally, visit firmware.html to see your work.